PM 6384
- 8in,Differential DSA Data Acquisition Card
PM 6384 is a data acquisition card specifically designed for mass-production testing on production lines.
It features 8-channel analog signal inputs, allowing for stereo monitoring via 4 sets of 3.5mm audio cables with adjustable monitoring gain.
PM 6384 provides an open application protocol interface—a lightweight, platform-independent interface—for programming data acquisition with your own (or third-party) software.
Description
Specifications
| Parameter | Value |
|---|---|
| 模拟采集通道数 | 8 |
| IEPE 通道 | 8(内置在采集前端) |
| 立体声监听通道 | 8(4组L/R) |
| IEPE 电源 | 4mA |
| 产品尺寸 (L*W*H mm) 【不含接口长度】 | 240*215*76 |
| 接口类型 | BNC |
| 适用温度范围 | -20 - 50℃ |
| 工作电压 | 220V |
| 耦合方式 | AC/DC耦合 |
| Trigger同步触发 | 内部触发延时:1.2ms |
| 总线通信 | ETH TCP/IP协议 |
Specifications
Parameters | |
Input Channels | 8 |
IEPE Channels | 8 channels (External switch) |
Stereo Monitoring Channel Count | 8 (4 pairs of L/R) |
Bus Communication | ETH TCP/IP protocol |
| Dimension mm | 240*215*76 |
Connection Type | BNC |
| Working Temperature | -20℃ - 50℃ |
Working Voltage | 220V |
| Coupling Mode | AC/DC coupling |
| Trigger Synchronization | Internal trigger delay: 1.2ms |
AI Specifications
AI Parameters | |
ADC Precision | 24 Bit |
ADC Type | Δ-Σ |
Sample Rate Range Hz | 2kHz-100kHz |
| FIFO | 1024 |
Mode Of Data Transmission | DMA |
Input Range | +/- 10Vrms(Range settings 1Vrms、5Vrms、10Vrms) |
Input Coupling Method | AC coupling,±0.03dB ;DC coupling:±0.1dB |
Input Impedance | Between positive input and ground :200 kohm |
| Flatness | 20Hz - 20kHz,typical value+/-0.01 dB ,maximum:0.015dB; 20Hz - 20kHz:typical value+/-0.08 dB ,maximum:0.1dB |
AI Idle noise (uVrms) | ||
| Sample Rate | fs=48kS/s | fs=96kS/s |
| Typical Value | ≤10 | ≤15 |
| Maximum Value | 15 | 17 |
PS:[1]Short circuit source impedance < 50 ohm,Working temperature 23±5℃,AC coupling, linear weighting, 1Vrms range setting | ||
AI SNR (dB) | ||
| Sample Rate | fs=48kS/s | fs=96kS/s |
| Typical Value | ≥120 | ≥118 |
| Minmum Value | 115 | 113 |
PS:[1]Differential Input,AC Coupling,Input Signal of 1kHz Sine Wave,10Vrms range setting,2Vrms [2]Bandwidth 22.4k、45k [3]Linear Weighting,SFDR text | ||
AI Dynamic Range (dB) | ||
| Sample Rate | fs=48kS/s | fs=96kS/s |
| Typical Value | ≥110 | ≥109 |
| Minmum Value | 108 | 107 |
PS:[1]Differential Input,AC Coupling,Input Signal of 1kHz Sine Wave,5Vrms range setting,2Vrms [2]Bandwidth 22.4k、45k [3]Linear Weighting | ||
AI THD+N (dB) | ||
| Sample Rate | fs=48kS/s | fs=96kS/s |
| Typical Value | ≤-102 | ≤101 |
| Maximum Value | -101 | -100 |
PS:[1]Differential Input,AC Coupling,Input Signal of 1kHz Sine Wave,5Vrms range setting,2Vrms [2]Bandwidth 22.4k、45k [3]Linear Weighting | ||
AI Cross talk (dB) | ||
| Sample Rate | fs=48kS/s | fs=96kS/s |
| Maximum Value | -106 | -104 |
PS:[1]Differential Input,AC Coupling,Input Signal of 1kHz Sine Wave,5Vrms range setting,4.5Vrms [2]Bandwidth 22.4k、45k [3]Linear Weighting | ||



