PM 6181

8in, 2out shuttle
PM 6181 is an audio analyzer designed specifically for sound and vibration testing.
8-channel analog signal input with optional IEPE constant current source exciter enabled or disabled for conditioning IEPE-powered sensors such as microphones, accelerometers, etc. 2-channels of analog signal output, which can be directly routed out or connected to the amplifier base plate and output, and then realize the high-power load drive such as artificial mouth and speaker.
The product has rich channel resources and excellent indicators, which can meet the acoustic test of the consumer electronics industry, the automobile industry, and the white goods industry.

Description

Specifications

Specifications

Parameters
Number of analog input channels	8
Number of analog output channels	2
IEPE channels	8 channels (integrated into the front-end acquisition)
IEPE power supply	4mA
Power amplifier Channel	2-channel
Amplifier Power	16W(single channel)
Bus line	USB
Products dimension mm	24027076.5（Excluding BNC）
Interface type	BNC
Operating temperature	-20℃ - 50℃

AI Specifications

AI Parameters
ADC Precision	24 Bit
ADC Type	Δ-Σ
Sample Rate Range	1kHz - 192kHz
FIFO	1024
Mode Of Data Transmission	DMA
Input Range	+/- 4.5Vrms
Gain error	+/- 0.03dB
Input Impedance	Input Positive Terminal to Ground: 100k ohm
Flatness	20Hz - 20kHz，Maximum＜+/-0.03 dB 5Hz - 50kHz，Maximum ＜+/-0.2 dB

AI Idle noise (uVrms)
Sample Rate	fs=48kS/s	fs=96kS/s
Maximum Value	13	15
PS：[1]Short circuit source impedance < 50 ohm，Working temperature 23±5℃，IEPE OFF

AI SNR (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Minimum Value	110	109
PS：[1]Differential Input，AC Coupling，Input Signal of 1kHz Sine Wave，0dBFS（4.5Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting

AI Dynamic Range (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Minimum Value	104	104
PS：[1]Differential Input，AC Coupling，Input Signal of 1kHz Sine Wave，-1dBFS（4.01Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting, DR testing method

AI THD+N (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Maximum Value	-98	-96
PS：[1]Differential Input，AC Coupling，Input Signal of 1kHz Sine Wave，-1dBFS（4.01Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting

AI THD (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Maximum Value	-100	-99
PS：[1]Differential Input，AC Coupling，Input Signal of 1kHz Sine Wave，-1dBFS（4.01Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting

AI Cross talk (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Maximum Value	-100	-100
PS：[1]Differential Input，AC Coupling，Input Signal of 1kHz Sine Wave，-1dBFS（4.01Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting

AO Specifications

AO Parameters
DAC accuracy	24 Bit
Sampling rate range	1kHz - 192kHz
Output voltage range	+/- 3.5Vrms
Gain error	+/- 0.03dB
Output impedance	Between positive input and negative ground
Flatness	20Hz - 20kHz，Maximum: 0.05dB 5Hz - 50kHz，Maximum: 0.6dB

AO Idle noise (uVrms)
Sample Rate	fs=48kS/s	fs=96kS/s
Maximum Value	15	20
PS：[1]Data Acquisition Device Impedance Greater Than 1 Mohm，Working temperature 23±5℃

AO SNR (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Minimum Value	105	95
PS：[1]Differential Output，AC Coupling，Output Signal of 1kHz Sine Wave，0dBFS（4.5Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting

AO Dynamic Range (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Minimum Value	102	102
PS：[1]Differential Output，AC Coupling，Output Signal of 1kHz Sine Wave，-1dBFS（2.67Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting，DR Testing Method

AO THD+N (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Maximum Value	-95	-95
PS：[1]Differential Output，AC Coupling，Output Signal of 1kHz Sine Wave，-1dBFS（2.67Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting

AO THD(dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Maximum Value	-100	-100
PS：[1]Differential Output，AC Coupling，Output Signal of 1kHz Sine Wave，-1dBFS（2.67Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting

AO Cross talk (dB)
Sample Rate	fs=48kS/s	fs=96kS/s
Maximum Value	-98	-93
PS：[1]Differential Output，AC Coupling，Output Signal of 1kHz Sine Wave，-1dBFS（2.67Vrms） [2]Bandwidth 22.4k、45k、90k [3]Linear Weighting